Corrosion Prevention
Parent Tag for articles relating to corrosion prevention.
Coatings for Marine Applications & Offshore Platforms
Marine and offshore platform applications are critical assets of national importance. With regard to anticorrosion coatings, there are...
QUIZ: Pipeline Crack Inspection (15 Questions to Test Your Knowledge)
The integrity of pipeline networks is threatened by cracks and other defects generated during manufacturing, installation and operation of...
The Dangers of Pipeline Flange Corrosion and What to Do About It
Corroded flanges can result in containment loss and leaks. The most common corrosion prevention methods revolve around proper sealing of...
Questioning Current Methods in Defining Proper Coating Surface Profile (Part 2)
Increasing surface roughness depth does not always ensure good coating adhesion. Here, we consider how adhesion ultimately depends on not...
11 Uses for Cupronickel and Why You Should Be Using It Now
Although cupronickel alloys were initially developed for corrosion-resistant piping and other marine applications, their use is now...
Beryllium Copper Alloys vs Steel: Which Metal Works Harder?
The addition of 2% beryllium to copper makes the alloy almost 600% stronger than copper. BeCu alloys outperform steel where a combination...
An Overview of Welded Joint Corrosion: Causes and Prevention Practices
Corrosion in welded joints is caused by a combination of manufacturing and metallurgical factors, including deficient weldment design, poor...
Video: When to Use Impressed Current Cathodic Protection
Impressed current cathodic protection (ICCP) is necessary when stray electrical currents threaten to corrode metal equipment. This video...
Polyurea Coating Spotlight with Kyle Flanagan
Polyurea coatings expert, Kyle Flanagan, discusses new market developments, construction projects using polyurea systems, new standards and...
Stopping Rust in Bolted Systems
In harsh salt or chemical environments, bolting systems are often the first to corrode. What mechanisms cause this rapid deterioration and...
An Intro to the Duplex System for Corrosion Protection
Two systems are better than one. Learn how they're combined to increase a substrate's resistance to corrosion.
Nitriding for Corrosion and Wear Fatigue Resistance
Nitriding, the process of introducing nitrogen into a metal surface, is an excellent method of controlling corrosion, as well as wear and...
Understanding Carburization: The Positive and Negative Impacts on Metals
Carburization and other case hardening methods are used to manufacture durable, low-cost low carbon steels and low alloy steels with...
Combating Cavitative Corrosion and Erosive Corrosion
Cavitation and corrosion are interrelated and they coexist in most fluid systems. Substrate material properties, fluid properties and...
Review of Solvent-Free Epoxy Protection for Secondary Containment Concrete
Liquid hazardous materials must be stored in such a way that if a spill or leak occurs, the material stays contained and does not...
Corrosion Control Considerations in the Equipment Design Process
The design process is crucial for implementing the proper anti-corrosion measures. There are numerous factors to consider and methods that...
The Role of Corrosion in the Flint Water Crisis
Brown discolored water began appearing in a city’s drinking water after a change to the water supply. Further investigations revealed the...
What New Materials Science Studies Suggest About Corrosion Control in the Future
New materials science research can ultimately lead to the development of better corrosion analyses, protection methods, and...
Top 5 Corrosion Threats Caused by Neglect
While corrosion is mostly considered to be the result of natural phenomena, it can also be a consequence of neglectful human behavior, such...
