Stress relieving is a heat treatment process in which a metal is subjected to a constant temperature that is below the metal's critical temperature, followed by controlled cooling. Drawing, forming and machining induce stresses in materials. A stress relief operation is typically used to remove… View Full Term
Trending Terms
Corrosionpedia Terms
Connect with us
Subscribe To Our Newsletter
By clicking sign up, you agree to receive emails from Corrosionpedia and agree to our Terms of Use and Privacy Policy.
Free Webinar: Introduction to Decouplers
That is a bold statement, no doubt. But think about it…what training have your personnel had specifically dedicated to the installation of an isolation kit? Has their training been specifically around the installation of standard gaskets in flanges? If so, they are likely installing isolation kits improperly by installing them as if they were standard gaskets.
Are your personnel responsible for testing isolation kits using Ohm-meters to test the flange for isolation? If they are, they are not measuring isolation properly.
This webinar will outline the differences between the installation of an isolation kit versus a standard gasket. It will also explain why an Ohm-meter is not the appropriate equipment to measure isolation. The webinar will further detail what the correct steps are in installing an isolation kit and how to properly test an isolating kit to ensure that all aspects of the kit are doing what they were intended to do.
Senior Product Manager
Sponsored by:
Your privacy is important to us. Corrosionpedia uses the information you provide to contact you about relevant content, products, and services. You can unsubscribe from these communications at any time. See our Terms of Use & Privacy Policy.