Paints and Plastics Coatings
Child Tag for content related to paints and plastics coatings.
The Growing Disconnect in the Pipe Coating Industry
There is a growing disconnect in the pipe coating industry between coating specification writers, engineers and ground-level coating...
Step-Change Epoxy Coatings for Corrosion Under Insulation
Epoxy phenolic alkylated amine coatings have the potential to revolutionize coating processes where high temperatures or CUI are a concern.
8 Methods of Coating Thickness Measurement
Measurement of film thickness can be done with many different instruments. Understanding the equipment available for film thickness...
The Impact of Minimum & Maximum DFT Values on Coating Performance
Two leading marine coating experts illustrate how to assess and control a myriad of painting process variables using a simple control chart...
The Future of Polyurea Coatings
Polyurea is commonly used as a waterproofing sealant and corrosion-resistant coating on metals and concrete surfaces. The reasons for its...
5 Most Common Types of Metal Coatings that Everyone Should Know About
The 5 most common types of metal coatings that can effectively prolong the service life of many metal assets by preventing corrosion...
Quality Assurance in the Coatings Industry: A Job Description
Quality assurance specialists are usually employed or subcontracted by an asset owner. In the paint and coatings industry, they verify that...
The Anatomy of a Coating Failure
Rarely does a coating fail because of only one contributing factor. Rather, it is usually two or more factors working in conjunction that...
Questioning Current Methods in Defining Proper Coating Surface Profile (Part 2)
Increasing surface roughness depth does not always ensure good coating adhesion. Here, we consider how adhesion ultimately depends on not...
Questioning Current Methods in Defining Proper Coating Surface Profile (Part 1)
In light of basic adhesion science, today’s surface profile measurement methods, standards and specifications have unique limitations in...
The Science of Anti-Corrosion Thin Films
Since the early 1900s, thin films have been explored for corrosion protection of metals. Through many decades of development, the thin...
Polyurea Coating Spotlight with Kyle Flanagan
Polyurea coatings expert, Kyle Flanagan, discusses new market developments, construction projects using polyurea systems, new standards and...
An Overview of Alkyd Resins
Alkyd-based paints have been a dominant product in the protective coating market since the 1930s. Find out more about alkyd resins in this...
An Intro to the Duplex System for Corrosion Protection
Two systems are better than one. Learn how they're combined to increase a substrate's resistance to corrosion.
Combating Cavitative Corrosion and Erosive Corrosion
Cavitation and corrosion are interrelated and they coexist in most fluid systems. Substrate material properties, fluid properties and...
The History and Industry Adoption of Polyurea Coating Systems
Since the early 1990s, when fast-set polyurea coatings were first introduced, the industry debate about these coatings, hybrids and...
Review of Solvent-Free Epoxy Protection for Secondary Containment Concrete
Liquid hazardous materials must be stored in such a way that if a spill or leak occurs, the material stays contained and does not...
Quiz: Anti-Graffiti Coatings and Corrosion
Anti-graffiti coatings can be used to help lower cleaning and repainting costs and deter further vandalism. Some coatings may also assist...
Concrete Flooring Moisture Issues
Addressing concrete floor moisture begins with proper design, curing and surface preparation. Testing for moisture content and identifying...
