Materials Selection

Latest Materials Selection Articles

• 
  Corrosion

  Refractory Metals: Properties, Types and Applications

  Refractory metals are widely used because of their unique and desirable properties and behaviors, especially their resistance to corrosion and their extraordinary...

  By: Corrosionpedia Staff

• 
  Scientific Properties

  6 Ways to Measure Fluid Viscosity

  Viscosity is one of the most essential physical properties of industrial fluids, such as coatings, paints and adhesives.Essentially, viscosity indicates a fluid’s...

  By: Krystal Nanan | Civil Engineer

• 
  Materials Selection

  All About Environmental Cracking in Nickel-Based Alloys

  Nickel (Ni)-based alloys are used in highly corrosive environments and often where other metals—such as stainless steels—have insufficient corrosion...

  By: Steven Bradley | Principal Consultant, Bradley Consulting Services

• 
  Corrosion Prevention

  Why is Stainless Steel Corrosion Resistant?

  Stainless steel is known for its corrosion resistance in many environments in which carbon and low-alloy tool steels would corrode. (Background reading: An Introduction...

  By: Michael Pfeifer | Principal Consultant and Trainer for Industrial Metallurgists, LLC

• 
  Failure

  6 Ways to Prevent Corrosion Failure Analysis Frustration

  Have you ever run into the following situation? A component within your product broke or your manufacturing line was producing bad components, and you wanted to...

  By: Michael Pfeifer | Principal Consultant and Trainer for Industrial Metallurgists, LLC

• 
  Failure

  An Introduction to Hydrogen Embrittlement

  Hydrogen embrittlement is the result of the absorption of hydrogen by susceptible metals, resulting in the loss of ductility and reduction of load-bearing capability...

  By: Michael Pfeifer | Principal Consultant and Trainer for Industrial Metallurgists, LLC

• 
  Materials Selection

  An In-Depth Look at Materials Selection

  Materials selection is a major corrosion control method in engineering design. It plays a role in the effective estimation of project costs, construction scheduling and...

  By: Andry Soetiawan | Material and Corrosion Consultant

• 
  Corrosion

  The Corrosion of Lightweight Materials Used in Automotive Applications

  Throughout the automotive industry there is an increasing interest in lightweight construction materials to achieve better fuel economy and meet regulatory requirements...

  By: Della Anggabrata

• 
  Corrosion

  In-Service Stress Corrosion Cracking of 316L Stainless Steel in H2S

  Stress corrosion cracking (SCC) is the cracking caused by the combined influence of tensile stress and a corrosive environment. In the worst case it can lead to sudden...

  By: Della Anggabrata

• 
  Coatings

  Step-Change Epoxy Coatings for Corrosion Under Insulation

  Coatings technology is evolving every day, with increasingly sophisticated solutions being developed to tackle some of the most serious concerns in the industry. One...

  By: Dr. Mike O'Donoghue and Vijay Datta

• 
  Corrosion

  Intergranular Corrosion: What It Is and How To Stop It

  There are many types of corrosion damage, such uniform corrosion and pitting corrosion that people can readily see with the naked eye. However, some corrosion damage is...

  By: Dennis Jayasinghe | Principal/Chief Technical Officer, Corr-Met Inspection & Consulting Inc.

• 
  Asset Management

  Guide to the Best Solution for Not-So-Large Corrosion Problems

  In the corrosion world it is generally accepted that there are eight basic types of corrosion. From this simple list of corrosion types, a daunting variety of corrosion...

  By: Bradley Erickstad | President, Coastal Corrosion Care LLC