High Abrasion

Latest High Abrasion Articles

• 
  Corrosion Prevention

  Fretting Corrosion Between Metals and How to Prevent It

  Tribocorrosion or mechanically assisted corrosion is defined as the degradation of a material surface subjected to the combined synergistic action of mechanical loading...

  By: Steven Bradley | Principal Consultant, Bradley Consulting Services

• 
  Corrosion Prevention

  Innovative Coating Solutions for Oil Sands Equipment

  Wear and tear on oil sands equipment represents a serious concern for the oil and gas industry. The cost of lost production output is extremely high. Whenever a part is...

  By: Jessica Zimmer

• 
  Coatings

  Flexible Coatings for Protection of Marine Structures

  Both abrasive and corrosive, the marine environment is unforgiving of maritime structures such as offshore platforms and rigs, and ocean-going vessels – all of...

  By: Denis Baker, Eng. | Special Projects Engineer, Rhino Linings Australasia Pty Ltd

• 
  Corrosion Prevention

  An Introduction to Corrosion Inhibiting Dry Film Lubricants

  From a lubrication point of view, extreme operational conditions may not commonly occur in every industry, but in some sectors such as defense and aerospace they are...

  By: Shivananda Prabhu

• 
  Surface Preparation

  5 Wet or Vapor Abrasive Blasting Equipment Considerations

  -- To learn more about Wet Abrasive Blasting, register for the upcoming webinar --Abrasive blasting is a common surface preparation technique to remove surface...

  By: Wade Hannon | Area Sales Manager, Specialty Products at GRACO Inc.

• 
  Surface Preparation

  Understanding the Industry Shift To Wet Abrasive Blasting

  -- To learn more about Wet Abrasive Blasting, register for the upcoming webinar --IntroductionA number of changes in the industry have led to the development of new...

  By: Wade Hannon | Area Sales Manager, Specialty Products at GRACO Inc.

• 
  Corrosion Failure

  The Science of Cavitation: Diagnosis & Resistance Methods

  When process equipment is manufactured, it is invariably designed to offer the maximum life for its particular construction. (For more on the importance of design, see...

  By: Gavin Bowers, CEng | Operations Manager, Belzona Polymerics Ltd