Coatings
Stopping Rust in Bolted Systems
In harsh salt or chemical environments, bolting systems are often the first to corrode. What mechanisms cause this rapid deterioration and...
The Effects of Salt Contamination on Coating Performance
A discussion of salt contamination on coating performance, risk assessment techniques and test methods before coating application and some...
An Intro to the Duplex System for Corrosion Protection
Two systems are better than one. Learn how they're combined to increase a substrate's resistance to corrosion.
Nitriding for Corrosion and Wear Fatigue Resistance
Nitriding, the process of introducing nitrogen into a metal surface, is an excellent method of controlling corrosion, as well as wear and...
Combating Cavitative Corrosion and Erosive Corrosion
Cavitation and corrosion are interrelated and they coexist in most fluid systems. Substrate material properties, fluid properties and...
The History and Industry Adoption of Polyurea Coating Systems
Since the early 1990s, when fast-set polyurea coatings were first introduced, the industry debate about these coatings, hybrids and...
Review of Solvent-Free Epoxy Protection for Secondary Containment Concrete
Liquid hazardous materials must be stored in such a way that if a spill or leak occurs, the material stays contained and does not...
Corrosion Control Considerations in the Equipment Design Process
The design process is crucial for implementing the proper anti-corrosion measures. There are numerous factors to consider and methods that...
What New Materials Science Studies Suggest About Corrosion Control in the Future
New materials science research can ultimately lead to the development of better corrosion analyses, protection methods, and...
Quiz: Anti-Graffiti Coatings and Corrosion
Anti-graffiti coatings can be used to help lower cleaning and repainting costs and deter further vandalism. Some coatings may also assist...
Concrete Flooring Moisture Issues
Addressing concrete floor moisture begins with proper design, curing and surface preparation. Testing for moisture content and identifying...
6 Things You Need to Know About Platinized Titanium Anodes
Platinized titanium anodes are preferred in impressed current cathodic protection systems exposed to marine environments due to the low...
Why Concrete Delamination Occurs - and What to Do About It
Delamination in concrete slabs can be a serious problem. This article examines how to prevent them—and how to find and fix them when they...
Beginners Guide to Becoming an Offshore Coating Inspector
Offshore coating inspectors must possess sound knowledge of various coating types, their applications and different types of defects. This...
How a Liquid-Infused Porous Surface Coating on Steel Can Resist Biofouling
Liquid-infused coatings improve upon traditional anti-fouling paints and coatings. They consist of a liquid lubricant that is stabilized...
Industry Experts Discuss Subsea Pipeline Corrosion Management
In this exclusive interview, three oil & gas industry corrosion experts discuss some of the key challenges in protecting subsea assets from...
Salt Limits to Prevent Premature Coating Failures
The presence of non-visible residual surface salts and their impact on life cycle coating performance is well documented, yet no widespread...
Flexible Coatings for Protection of Marine Structures
Protecting offshore structures from corrosion and abrasion damage is an ongoing and costly challenge for operators. A polyurea coatings...
How to Enhance Safety When Working With Volatile Organic Compounds
VOCs are emitted from coatings used in the corrosion protection industry. Several techniques are available that reduce the VOCs produced...